Design of Savonius-Darrieus a Hybrid Wind Turbine
Fitria Hidayanti1, Erna Kusuma Wati2, Yohanes3, Pudji Untoro4
1Fitria Hidayanti*, Department of Engineering Physics, Universitas Nasional, Jakarta, Indonesia.
2Erna Kusuma Wati, Department of Engineering Physics, Universitas Nasional, Jakarta, Indonesia.
3Yohanes, Department of Engineering Physics, Universitas Nasional, Jakarta, Indonesia.
4Pudji Untoro, Department of Engineering Physics, Universitas Nasional, Jakarta, Indonesia.
Manuscript received on March 11, 2020. | Revised Manuscript Received on March 13, 2020. | Manuscript published on March 15, 2020. | PP: 107-109 | Volume-4 Issue-7, March 2020. | Retrieval Number: G0724034720/2020©BEIESP | DOI: 10.35940/ijmh.G0724.034720
Open Access | Ethics and Policies | Cite
© The Authors. Published By: Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Savonius wind turbine design use type two blades with a diameter of 15.5 cm, a height of 10.9 cm and turbine weight of 51.3 g. The Darrieus wind turbine design uses type three blades with dimensions 21.8 cm x 8.7 cm x 2.3 cm. The weight of each blade is 51.3 g with the angle between the blades being 120⁰. The voltage of 2.5 V produced a minimum turbine rotation speed of 284.2 rpm and a maximum of 296.0 rpm. When the voltage was increased to 5.0 V, the minimum speed is 342.8 rpm and a maximum speed of 366.4 rpm. When given a voltage of 7.5 V, a minimum speed of 461.7 rpm and a maximum of 481.3 rpm were produced.
Keywords: hybrid wind turbine, turbine rotation, design, vertical axis, savonius, darrieus